|S. No.||Name of Equipment||Equipment|
|A concrete mixer (often mistakenly called a cement mixer) is a device that homogeneously combines cement, aggregate such as sand or gravel, and water to form concrete. A typical concrete mixer uses a revolving drum to mix the components. For smaller volume works portable concrete mixers are often used so that the concrete can be made at the construction site, giving the workers ample time to use the concrete before it hardens.|
Paver Block Plant
|Monitor plants and factory production sites by getting access to live data. To keep quality standards high and to stop paver blocks from cracking, there must be proper check that the blocks are being produced as per their specifications.|
Paver Finisher Machine
A paver (paver finisher, asphalt finisher, paving machine) is a piece of construction equipment used to lay asphalt on roads, bridges, parking lots and other such places. It lays the asphalt flat and provides minor compaction before it is compacted by a roller. The asphalt is added from a dump truck or a material transfer unit into the paver's hopper. The conveyor then carries the asphalt from the hopper to the auger. The auger places a stockpile of material in front of the screed. The screed takes the stockpile of material and spreads it over the width of the road and provides initial compaction.
A backhoe loader is a heavy equipment vehicle that consists of a tractor like unit fitted with a loader-style shovel/bucket on the front and a backhoe on the back. Due to its (relatively) versatility, backhoe loaders are very common in urban engineering (such as building a house, urban roads, etc.) as well as developing countries. This type of machine is similar to and derived from what is now known as a TLB (Tractor-Loader-Backhoe), which is to say, an agricultural tractor fitted with a front loader and rear backhoe attachment.
A road roller (sometimes called a roller-compactor, or just roller) is a compactor type engineering vehicle used to compact soil, gravel, concrete, or asphalt in the construction of roads and foundations. Similar rollers are used also at landfills or in agriculture.
In some parts of the world, road rollers are still known colloquially as steam rollers, regardless of their method of propulsion. Road rollers use the weight of the vehicle to compress the surface being rolled (static) or use mechanical advantage (vibrating). Initial compaction of the substrate on a road project is done using a pad foot drum roller, which achieves higher compaction density due to the pads having less surface area. On large freeways a four-wheel compactor with pad foot drum and a blade, such as a Caterpillar 815/825 series machine, would be used due to its high weight, speed and the powerful pushing force to spread bulk material.
A rock breaker is a machine designed to manipulate large rocks, including reducing large rocks into smaller rocks. They are typically used in the mining industry to remove oversize rocks that are too large or too hard to be reduced in size by a crusher. Rock breakers consist of two major components, a hydraulic hammer (used to break rocks) and a boom (the arm). There are two major types of rock breakers, mobile and stationary - typically placed on a pedestal or slew frame
|A crane is a type of machine, generally quipped with a hoist rope, wire ropes or chains, and sheaves, that can be used both to lift and lower materials and to move them horizontally. It is mainlyused for lifting heavy things and transporting them to other places.|
Apart from the above equipment’s, our Company also owns and holds other equipment’s such as Wheel Loader, Bitumen Tanker, Concrete Pump, Drum Mix Plant, RMC Plant Macons, Stone Crusher Machine, Motor Grader, Pocklane– Excavators